Carbon Steel
Cost-effective strength and weldability for piping, structures and pressure equipment.
- A105
- A106 Gr.B
- A53
- API 5L
- A516-70
- 1045
- Q345

Carbon, alloy, tool and stainless steel and nickel alloys, supplied as pipes, bars, forgings, plates, strips, coil, wire, fasteners, fittings and flanges. Made to ASTM, ASME, EN, DIN, JIS and GB, and shipped worldwide.
Five steel families, arranged from general engineering to extreme service. Each is supplied to the exact grade, standard and edition on your purchase order.
Cost-effective strength and weldability for piping, structures and pressure equipment.
Chrome-moly grades for high strength, toughness and elevated-temperature service.
Hardness and wear resistance for dies, moulds, punches and cutting tools.
Austenitic, duplex and martensitic grades for corrosive and hygienic duty.
Superalloys that hold strength and resist attack where steels fail.
Search by trade name, UNS number, ASTM forging grade, EN designation, W.Nr. or JIS. If the grade you need is not listed, send us the specification and we will confirm availability.
| AISI / SAE | EN designation | W.Nr. | JIS |
|---|---|---|---|
| 4140 | 42CrMo4 | 1.7225 | SCM440 |
| 4130 | 25CrMo4 | 1.7218 | SCM430 |
| 4135 | 34CrMo4 | 1.7220 | SCM435 |
| 4340 | 34CrNiMo6 | 1.6582 | |
| 4317 | 17NiCrMo6-4 | 1.6566 | |
| 8620 | 20NiCrMo2-2 | 1.6523 | SNCM220 |
| 9840 | 36CrNiMo4 | 1.6511 | |
| 4145H | — | — | |
| 4145H Mod | 40NiCrMo7 | 1.6565 | |
| 4330V | — | — | |
| 4330V Mod | 30NiCrMo12 | 1.6655 | |
| — | 30CrNiMo8 | 1.6580 | |
| — | 16NiCrMo12 | 1.6657 | |
| — | 41CrAlMo7-10 | 1.8509 | |
| — | 12CrMo9-10 | 1.7380 | |
| — | 18CrMoS4 | 1.7244 |
| Grade | UNS | ASTM forging | EN W.Nr. |
|---|---|---|---|
| Martensitic & ferritic | |||
| 410 | S41000 | A182 F6a | 1.4006 |
| F6b | S41026 | A182 F6b | — |
| CA6NM / F6NM | S41500 | A182 F6NM | 1.4313 |
| 420 | S42000 | — | 1.4021 / 1.4028 |
| 430 | S43000 | A182 F430 | 1.4016 |
| Austenitic | |||
| 304 | S30400 | A182 F304 | 1.4301 |
| 304L | S30403 | A182 F304L | 1.4306 / 1.4307 |
| 304N | S30451 | A182 F304N | — |
| 304LN | S30453 | A182 F304LN | 1.4311 |
| 309 | S30900 | — | 1.4828 |
| 309S | S30908 | — | 1.4833 |
| 309H | S30909 | A182 F309H | — |
| 310 | S31000 | A182 F310 | — |
| 310S | S31008 | — | 1.4845 |
| 316 | S31600 | A182 F316 | 1.4401 |
| 316L | S31603 | A182 F316L | 1.4404 |
| 316N | S31651 | A182 F316N | 1.4406 |
| 316LN | S31653 | A182 F316LN | 1.4429 |
| 316L Mod (implant) | S31673 | ASTM F138 | 1.4435 |
| 316LVM | — | ASTM F138 Gr.2 | 1.4441 |
| 317 | S31700 | A182 F317 | — |
| 317L | S31703 | A182 F317L | 1.4438 |
| 317LMN | S31726 | A182 F48 | 1.4439 |
| 321 | S32100 | A182 F321 | 1.4541 |
| 347 | S34700 | A182 F347 | 1.4550 |
| 348 | S34800 | A182 F348 | — |
| 253MA | S30815 | A182 F45 | 1.4835 |
| 330 | N08330 | — | 1.4886 |
| 333 | N06333 | — | — |
| High-nitrogen (Nitronic) | |||
| Nitronic 50 / XM-19 | S20910 | A182 FXM-19 | 1.3964 |
| Nitronic 40 / XM-10 | S21900 | — | 1.3965 |
| XM-11 | S21904 | A182 FXM-11 | — |
| Nitronic 60 | S21800 | — | — |
| Nitronic 30 | S20400 | — | — |
| Nitronic 32 / XM-28 | S24100 | — | — |
| Nitronic 33 / XM-29 | S24000 | — | — |
| Super-austenitic | |||
| 904L | N08904 | A182 F904L | 1.4539 |
| Alloy 20 | N08020 | A182 F20 | 2.4660 |
| 254 SMO | S31254 | A182 F44 | 1.4547 |
| AL-6XN | N08367 | A182 F62 | — |
| Alloy 926 / 1925hMo | N08926 | — | 1.4529 |
| 654 SMO | S32654 | — | 1.4652 |
| Sanicro 28 | N08028 | — | 1.4563 |
| S31725 | S31725 | A182 F47 | — |
| S34565 | S34565 | A182 F49 | 1.4565 |
| S31266 | S31266 | A182 F58 | — |
| Precipitation hardening | |||
| 17-4PH / 630 | S17400 | A564 Type 630 | 1.4542 |
| 15-5PH / XM-12 | S15500 | A564 XM-12 | 1.4545 |
| 17-7PH / 631 | S17700 | A564 Type 631 | 1.4568 |
| PH15-7Mo / 632 | S15700 | — | 1.4574 |
| PH13-8Mo / XM-13 | S13800 | A564 XM-13 | 1.4534 |
| Duplex & super duplex | |||
| 2205 | S31803 / S32205 | A182 F51 / F60 | 1.4462 |
| 329 | S32950 | A182 F52 | — |
| 2507 | S32750 | A182 F53 | 1.4410 |
| Zeron 100 | S32760 | A182 F55 | 1.4501 |
| S31200 | S31200 | A182 F50 | — |
| S39274 | S39274 | A182 F54 | — |
| S39277 | S39277 | A182 F57 | — |
| UR 52N+ | S32520 | A182 F59 | 1.4507 |
| Ferralium 255 | S32550 | A182 F61 | — |
| S33228 | S33228 | A182 F56 | — |
| Trade name | UNS | Alloy designation | W.Nr. |
|---|---|---|---|
| Pure nickel | |||
| Nickel 200 | N02200 | Alloy 200 | 2.4066 |
| Nickel 201 | N02201 | Alloy 201 | 2.4068 |
| Monel (Ni-Cu) | |||
| Monel 400 | N04400 | Alloy 400 | 2.4360 |
| Monel K-500 | N05500 | Alloy K-500 | 2.4375 |
| Monel R-405 | N04405 | Alloy R-405 | — |
| Hastelloy (Ni-Mo / Ni-Cr-Mo) | |||
| Hastelloy B | N10001 | Alloy B | — |
| Hastelloy B-2 | N10665 | Alloy B-2 | 2.4617 |
| Hastelloy B-3 | N10675 | Alloy B-3 | 2.4600 |
| Hastelloy C-4 | N06455 | Alloy C-4 | 2.4610 |
| Hastelloy C-22 | N06022 | Alloy C-22 | 2.4602 |
| Hastelloy C-276 | N10276 | Alloy C-276 | 2.4819 |
| Hastelloy C-2000 | N06200 | Alloy C-2000 | 2.4675 |
| Hastelloy G | N06007 | Alloy G | 2.4618 |
| Hastelloy G-3 | N06985 | Alloy G-3 | 2.4619 |
| Hastelloy G-30 | N06030 | Alloy G-30 | — |
| Hastelloy G-35 | N06035 | Alloy G-35 | — |
| Hastelloy X | N06002 | Alloy X | 2.4665 |
| Inconel (Ni-Cr) | |||
| Inconel 600 | N06600 | Alloy 600 | 2.4816 |
| Inconel 601 | N06601 | Alloy 601 | 2.4851 |
| Inconel 602CA | N06025 | Alloy 602CA | 2.4633 |
| Inconel 617 | N06617 | Alloy 617 | 2.4663 |
| Inconel 625 | N06625 | Alloy 625 | 2.4856 |
| Inconel 625LCF | N06626 | Alloy 625LCF | 2.4856 |
| Inconel 686 | N06686 | Alloy 686 | 2.4606 |
| Inconel 690 | N06690 | Alloy 690 | 2.4642 |
| Inconel 693 | N06693 | Alloy 693 | — |
| Inconel 718 | N07718 | Alloy 718 | 2.4668 |
| Inconel 725 | N07725 | Alloy 725 | — |
| Inconel 751 | N07751 | Alloy 751 | — |
| Inconel X-750 | N07750 | Alloy X-750 | 2.4669 |
| Incoloy (Ni-Fe-Cr) | |||
| Incoloy 800 | N08800 | Alloy 800 | 1.4876 |
| Incoloy 800H | N08810 | Alloy 800H | 1.4958 |
| Incoloy 800HT | N08811 | Alloy 800HT | 1.4959 |
| Incoloy 825 | N08825 | Alloy 825 | 2.4858 |
| Incoloy 925 | N09925 | Alloy 925 | — |
| Incoloy 945 | N09945 | Alloy 945 | — |
| Incoloy DS | — | Alloy DS | 1.4862 |
| Incoloy A-286 | S66286 | Alloy A-286 | 1.4980 |
| Alloy 31 | N08031 | Alloy 31 | 1.4562 |
| Nimonic & superalloys | |||
| Nimonic 75 | N06075 | Alloy 75 | 2.4630 |
| Nimonic 80A | N07080 | Alloy 80A | 2.4631 |
| Nimonic 90 | N07090 | Alloy 90 | 2.4632 |
| Nimonic 105 | — | Alloy 105 | 2.4634 |
| Nimonic 115 | — | Alloy 115 | 2.4636 |
| Nimonic 263 | N07263 | Alloy 263 | 2.4650 |
| Nimonic 901 | N09901 | Alloy 901 | 2.4662 |
| Waspaloy | N07001 | Alloy Waspaloy | 2.4654 |
| Udimet 500 | N07500 | Alloy U500 | 2.4983 |
| René 41 | N07041 | Alloy R41 | 2.4973 |
| Haynes 230 | N06230 | Alloy 230 | 2.4733 |
| Cobalt alloys | |||
| Haynes 188 | R30188 | Alloy 188 | 2.4683 |
| Haynes 25 / L-605 | R30605 | Alloy L-605 | 2.4964 |
| Stellite 6B | R30016 | Alloy 6B | — |
| Soft magnetic (Fe-Co) | |||
| Permendur 49 / Vacoflux 50 / Permendur 2V | — | 49Co-49Fe-2V | — |
| AISI | EN / DIN designation | W.Nr. | JIS |
|---|---|---|---|
| Cold work | |||
| D2 | X153CrMoV12 | 1.2379 | SKD11 |
| D3 | X210Cr12 | 1.2080 | SKD1 |
| D6 | X210CrW12 | 1.2436 | SKD2 |
| A2 | X100CrMoV5 | 1.2363 | SKD12 |
| A6 | 70MnMoCr8 | 1.2824 | — |
| O1 | 100MnCrW4 | 1.2510 | SKS3 |
| O2 | 90MnCrV8 | 1.2842 | — |
| O6 | — | — | SKS95 |
| O7 | 110WCrV5 | 1.2519 | — |
| L2 | 115CrV3 | 1.2210 | SKS43 |
| S1 | 45WCrV7 | 1.2542 | SKS41 |
| — | 60WCrV8 | 1.2550 | — |
| S7 | 50CrMoV13-15 | 1.2355 / 1.2357 | — |
| 6F7 | X45NiCrMo4 | 1.2767 | SKT6 |
| — | X165CrMoV12 | 1.2601 | — |
| — | X96CrMoV12 | 1.2376 | — |
| — | X50CrMoW9-1-1 | 1.2631 | — |
| — | 81MoCrV42-16 | 1.2369 | — |
| — | 142WV13 | 1.2562 | — |
| — | X39CrMo17-1 | 1.4122 | — |
| DC53 (8% Cr) | — | — | DC53 |
| Hot work | |||
| H10 | X32CrMoV3-3 | 1.2365 | SKD7 |
| H10A | X32CrMoCoV3-3-3 | 1.2885 | — |
| H11 | X37CrMoV5-1 | 1.2343 | SKD6 |
| H12 | X37CrMoW5-1 | 1.2606 | — |
| — | X35CrWMoV5 | 1.2605 | SKD62 |
| H13 | X40CrMoV5-1 | 1.2344 | SKD61 |
| H19 | X45CoCrWV5-5-5 | 1.2678 | — |
| H21 | X30WCrV9-3 | 1.2581 | SKD5 |
| L6 | 55NiCrMoV7 | 1.2714 | SKT4 |
| — | X38CrMoV5-3 | 1.2367 | — |
| — | X48CrMoV8-1-1 | 1.2360 | — |
| — | 38CrCoWV18-17-17 | 1.2661 | SKD8 |
| 314 | X16CrNiSi25-20 | 1.2782 | — |
| H19A | X45CoCrMoV5-5-3 | 1.2889 | — |
| — | X6NiCrTi26-15 | 1.2779 | — |
| — | X63CrMoV5-1 | 1.2362 | — |
| Plastic mould | |||
| P20 | 40CrMnMo7 | 1.2311 | — |
| P20+S | 40CrMnMoS8-6 | 1.2312 | — |
| P20+Ni / 718 | 40CrMnNiMo8-6-4 | 1.2738 | — |
| 420 (mould grade) | X42Cr13 | 1.2083 | SUS420J2 |
| S136 | X38CrMo16 | 1.2316 | — |
| NAK80 | — | — | NAK80 |
Every material family is available in the forms below, either in standard sizes or processed to your drawing. Cut-to-length and cut-to-size service is available.
Seamless · Welded · Boiler · Heat exchangerRound, square and rectangular sections, from small-bore instrument tubing to large-diameter line pipe.
Round · Flat · Hex · Rings · DiscsHot-rolled, forged or bright bar, plus open-die forgings made to your drawing.
Hot & cold rolledSheet, plate, precision strip and coil, supplied cut to size.
ASME B16.5 · B16.9 · B16.11
Bolts · Studs · Nuts · Wire
Made to drawingSix stages under one quality system, so every heat can be traced from raw stock to the container door.

Billets are rolled into bar, plate and strip with controlled reduction and temperature.

Open-die forging produces shafts, rings, discs and blocks with refined grain structure.

Normalising, quenching and tempering, and solution annealing are carried out to the material specification.

CNC turning and milling for flanges, fittings and parts made to drawing.

Chemical, mechanical, NDT, PMI and dimensional checks are carried out before release.

Seaworthy packing, full documentation and delivery by sea, air or land.
Our materials go into applications where pressure, temperature and corrosion push metals to their limits.
Line pipe, sour-service alloys, flanges and fasteners for upstream, midstream and downstream projects.
Chrome-moly and stainless piping for high-temperature, high-pressure process units.
Boiler tubes, P91 piping and turbine-grade alloys for thermal, nuclear and renewable plants.
Inconel and high-strength alloys for engine components, fasteners and structural parts.
Duplex stainless and Monel for seawater systems, platforms and shipbuilding.
Alloy and tool steels for gears, shafts, dies and moulds that need a long service life.

Every heat number is recorded so that material can be traced from raw stock to finished product. Every shipment comes with mill test certificates, and independent third-party inspection can be arranged on request.
These are the questions procurement teams ask us most often. For anything else, email our sales team.
sales@hlsteelpieces.comWe manufacture and supply carbon steel, alloy steel, tool steel, stainless steel and nickel alloys in the form of pipes, bars, forgings, plates, strips, coil, wire, fasteners, pipe fittings, flanges and custom shapes.
Material is produced to the standard specified on your purchase order, including ASTM, ASME, EN, DIN, JIS and GB. Please state the grade, standard and edition in your inquiry so we can confirm compliance before quoting.
Yes. Every shipment comes with mill test certificates. EN 10204 3.1 certificates are available, and third-party inspection can be arranged on request.
Email sales@hlsteelpieces.com or use the inquiry form with the grade, standard, product form, dimensions, quantity and destination port. Our sales team responds with price, lead time and payment terms.
Yes. We supply cut-to-length bars and pipes, cut-to-size plates, and open-die forgings such as shafts, rings, discs and blocks made to your drawing.
We are located in Zhennan Industrial Park, Shiyan Town, Dongtai City, Yancheng City, Jiangsu Province 224211, China, with export shipments through Shanghai and other Yangtze River Delta ports. Goods are packed for export and shipped by sea, air or land under FOB, CFR or CIF terms.
Tell us the grade, size and quantity you need. Our sales team will reply with a competitive quotation, the lead time, and the documents your project requires.